Hire help & advice
Working height & access planning
Measure the actual point where the work will happen, then check whether you can position equipment beneath it or need horizontal reach. Building labels are not reliable height measurements.
Measure from the intended position
Work height
Record the height of each work point from the ground where the equipment will stand. Note changes in ground level.
Horizontal reach
Measure the setback or obstacle between the setup position and the task. Extra height alone does not solve a blocked approach.
Room to work
Allow for the machine body, movement and any outriggers or stabilisers specified for the supplied equipment.
Keep the measurements separate
On smaller screens, scroll sideways to compare.
| Term | What it describes | What to check |
|---|---|---|
| Platform height | The level on which the user stands. | The exact selected equipment and configuration. |
| Overall / stowed height | The physical height of the equipment in the stated condition. | Doorways, ceilings and travel clearance. |
| Working / reach height | An approximate working level above a platform or standing position. | The user, task and manufacturer guidance. |
| Outreach | Horizontal distance available from the equipment. | The working envelope and load at that position. |
Turn measurements into a shortlist
Record the work points
Use measured heights and setbacks, with photos to explain the site.
Check the approach
Include access width, turns, surfaces and overhead restrictions.
Compare suitable equipment
Use the finder, then confirm critical dimensions and the supplied instructions.