Compact reach for everyday site lifting.
7m Telehandler Hire is intended for lifting and placing pallets, materials and other suitable loads around construction, commercial and agricultural sites. The telescopic boom helps position loads where a conventional forklift may not provide enough height or forward reach.
Plan the hire around the load, lift height, forward reach, ground conditions, overhead clearance and loading area. Tell us about the site, dates and intended attachment so we can check the appropriate machine and transport arrangement.
Exact supplied machine, attachment and capacity details can vary by manufacturer and depot availability. The figures above are practical planning values, not a substitute for the machine load chart or site assessment.
Lift and place safely
Use the stated lift height and capacity as a starting point, then confirm the load chart for the required reach and placement position.
Plan access early
Check route width, turning space, ground conditions, overhead clearance, loading areas and room to manoeuvre before delivery.
Choose the right attachment
Forks are commonly used for palletised materials. Tell us if you need another approved attachment so availability can be checked.
Typical supplied machine may vary by manufacturer and depot availability. Confirm critical dimensions, load capacity and lift performance where site access or placement height is important.
Plan the hire around your site.
Share the delivery route, unloading area, intended loads and the height or reach required. Slopes, soft ground, restricted access and overhead obstructions can affect whether the planned machine is suitable.
We will agree the delivery and collection arrangement with you. The equipment remains your responsibility until it has been physically collected.
Technical specifications
Machine typeConstruction telehandler
Maximum lift height7m approx.
Maximum lift capacity3,100kg approx.
Forward reach3.7m approx.
Machine width2.23m approx.
Overall height2.49m approx.
Overall length4.99m approx.
Operating weight7.8t approx.
FuelDiesel
Drive and steering3 steer modes, 4WD
Representative referenceJCB 531-70 class reference; supplied equivalent may vary
Forks and attachments
Forks are commonly used for palletised materials and general site handling. Other approved attachments may be available for the supplied machine, but suitability depends on the load, reach, attachment rating and manufacturer load chart. Tell us what you need when enquiring so it can be checked. Delivery and collection arrangements should also allow for the machine's overall size and operating area.
7m Telehandler Hire FAQs
What can a telehandler be used for?
It can lift and place suitable pallets, building materials and site loads where height or forward reach is required. The load, attachment and position must remain within the machine's load chart.
How high can it lift?
Use 7m approx. as the representative planning value. Lift capacity reduces as the boom extends, so confirm the required load and placement position before hire.
How much can it lift?
The representative maximum lift capacity is 3,100kg approx.. The safe capacity at a particular reach and height may be lower.
How far can it reach?
Plan around 3.7m approx. maximum forward reach and confirm the load chart for the intended load and position.
What access is required?
Allow for 2.23m approx. machine width, turning space, ground conditions, loading space and overhead clearance. The route must be checked for the complete delivery and working arrangement.
Are forks included?
Forks are commonly supplied for suitable palletised loads, subject to the supplied machine and attachment availability. Confirm this when enquiring.
Can I hire another attachment?
Other approved attachments may be available for an additional charge. Tell us the load and intended use so compatibility and availability can be checked.
What machine may be supplied?
JCB 531-70 class reference; supplied equivalent may vary The exact model, dimensions, attachment and performance may vary by manufacturer and depot availability.
Do I need a licence or qualification?
Requirements depend on the operator, site and intended use. Confirm the relevant training and site rules before operating the telehandler.
How do I arrange delivery and collection?
Provide the location, access details and dates in your enquiry. SAB will confirm transport and the collection arrangement with you.
How do I enquire?
Select ENQUIRE NOW and include the site location, dates, planned load, required lift height and any attachment request.
Need the right telehandler for your site?
Send an enquiry with your location, dates, planned load and required reach so SAB can confirm availability, transport and the most suitable supplied machine.
