8m Diesel Scissor Lift Hire

£225.00 / week

£270.00 inc VAT

Transport quoted separately based on delivery location.

MACHINE WIDTH1.76mApproximate typical width

MACHINE LENGTH2.72mApproximate typical length

Machine height guide

PLATFORM HEIGHT7.92mApproximate maximum platform height

WORKING HEIGHT9.92mApproximate maximum working height

Supplied machines may vary by manufacturer and depot availability. Confirm critical dimensions before hire.

UK-wide hire supportMachine hire arranged across the UK.

Rough-terrain accessDesigned for suitable outdoor site conditions.

Practical adviceHelp checking the machine, route and site.

Clear hire processSupport from enquiry through collection.

Powered access planned around your site.

The 8m diesel scissor lift is suited to outdoor construction, steelwork, cladding, maintenance and installation where a rough-terrain platform is appropriate. Tell us where and when you need the machine so SAB can check availability, access, transport and the right supplied configuration.

Diesel site capability

A diesel-powered machine format for suitable construction-site and outdoor powered-access work.

Rough-terrain drive

The typical SJ6826 RT has four-wheel-drive capability; ground and slope conditions still need checking.

Higher load capacity

The typical SJ6826 RT provides a 431kg distributed main-platform capacity, subject to the supplied machine.

Is this 8m diesel scissor lift hire right for your job?

The 8m diesel scissor lift is suited to outdoor construction, steelwork, cladding, maintenance and installation where a rough-terrain platform is appropriate.

Typically supplied as a Skyjack SJ6826 RT or equivalent; specifications may vary slightly. Typical platform height 7.92m and working height 9.92m. The machine is materially larger and heavier than an indoor electric access platform, so check the route, ground, transport access, overhead restrictions and working area before enquiring.

Use the figures below as planning guidance only. The exact supplied machine, options and operating limits must be confirmed where critical to site access, ground loading or lifting requirements.

Technical specifications

Machine typeDiesel rough-terrain scissor lift

Power sourceDiesel

Platform height7.92m approx.

Working height9.92m approx.

Machine width1.76m approx.

Machine length2.72m approx.

Safe working load431kg distributed main platform

Approx. machine weightApprox. 2,900–3,500kg, model/configuration dependent

Platform / cageApprox. 1.42m × 2.44m; 1.52m extension deck; foam-filled tyres

Drive / terrainRough terrain

Model noteTypically supplied as a Skyjack SJ6826 RT or equivalent; specifications may vary slightly. Typical platform height 7.92m and working height 9.92m.

DELIVERY & COLLECTION

Plan the hire around your site.

Request your preferred delivery date when enquiring. Delivery is subject to depot stock, machine availability and transport availability, so timing may vary.

Suitable access is required for the delivery vehicle and a machine of this size and weight. Tell SAB about restricted access, ground conditions, slopes, soft ground or other site constraints before the hire is arranged.

SITE REQUIREMENTS

Check the route and operating surface.

The supplied machine must be used on ground, slopes, wind conditions and work areas suitable for its exact configuration and operating instructions.

When the hire is finished, contact SAB Supply to arrange collection. Keep the equipment secure and available until it has physically been collected.

QUESTIONS

8m Diesel Scissor Lift Hire FAQs

What machine will be supplied?

Typically supplied as a Skyjack SJ6826 RT or equivalent; specifications may vary slightly. Typical platform height 7.92m and working height 9.92m. Ask us to confirm the available model if a particular dimension, powertrain or operating limit is critical.

What are the platform and working heights?

The planning figures are approximately 7.92m platform height and 9.92m working height. Confirm the exact supplied machine before relying on a critical clearance.

How much can the platform carry?

The typical safe working load is 431kg distributed main platform. This includes people, tools and materials; never exceed the limit shown on the supplied machine.

How wide and long is the machine?

Typical planning dimensions are approximately 1.76m wide and 2.72m long. Confirm route width, turning space and transport requirements before delivery.

Is it suitable for indoor or outdoor work?

Rough terrain suitability depends on the supplied machine, surface, ventilation, weather, wind, access and the manufacturer’s operating limits. Tell us about the site before booking.

How do I enquire?

Select enquire now and send your name, contact details, delivery postcode, required date and what you need help with. The product title and page context are included automatically.

How do I arrange collection?

Contact SAB Supply when the hire is finished and the relevant depot will arrange collection. Keep the equipment secure and available until it has physically been collected.

READY TO PLAN THE HIRE?

Need 8m diesel scissor lift hire?

Send us the machine, location and required date so we can check the right supplied configuration and arrange the next steps.